Table of Contents
Advertisement
Manual
4.
PROGRAMMING
1.
Turn on your PC. Once it has booted up connect one end of the supplied cable
into a spare USB port on the back or front of the PC case. This style of connector
is shown circled below.
2.
Plug the other end of the supplied USB cable into the connector on the
programming cradle shown below.
3.
Insert the supplied CDROM containing the programming software into your
CDROM drive.
4.
Browse the contents of this disk using the My Computer icon on your desktop.
CommtechWireless
©
7900 Pager Programming
Page
7
Hide quick links:
Advertisement
Table of Contents
