The 7900 Pager; Case Layout; Kit Components; Other Required Components - commtech wireless 7900 Programming Manual

7900 Pager Programming
3.

THE 7900 PAGER

3.1

Case Layout

The Commtech 7900 pager has four buttons on its case.
3.2

Kit Components

Each programming kit contains:

The 7900 programming cradle with USB cable

A CDROM disk containing the 7900 programming software

This 7900 programming manual
3.3

Other Required Components

The following will also be required in order to program the pagers:

At least one 7900 pager that requires programming.

The cap codes that the pager will respond to.

The baud rate of POCSAG data that is being transmitted.

The frequency of the transmitter.

A start-up message that will be observed when turning on the pager.

An IBM compatible PC running Windows XP with a CDROM drive and a spare
USB port.

Basic IBM PC knowledge.

Basic understanding of POCSAG paging principles.
6
Page
| | |
Escape Left Right
Key Key Key
|
Read
Key
CommtechWireless
©
Manual