Alerting - commtech wireless 7900 Programming Manual

Manual
5.1.3

Alerting

Allow User To Select Tone
This field is used to limit user access to changing tone and vibrate settings from within
the pagers menus. There are three options.
Setting
Full System
Select
Full User Select
Semi User Select
CommtechWireless
©
The pager will have no Alert Settings menu. The pager will always beep linked to the
received A, B, C or D beep code. Urgent call and priority override are always
activated.
User can select a beep code A/B/C/D or a melody M1/M2/M3/M4 for the alert tone.
The pager is not linked to the beep code except urgent call and priority override.
User can select between tone or melody M1/M2/M3/M4. When tone is selected,
the tone will be linked to the received beep code A/B/C/D. When M1- M4 is selected
pager will not link with function. Urgent call and priority override will take priority.
7900 Pager Programming
Description
15
Page