Page 1
7950 Pager User Manual (Manual Revision 1.00) Last updated 24/04/2012...
Page 2
Commtech Wireless, except in the normal use of the software to make an archival copy of the software for the sole purpose of backing up the software and protecting your investment from loss or damage.
Manual 7950 Pager Table of Contents About This Handbook ....................... 4 THE 7950 PAGER ..........................5 Getting Started ......................... 5 2.1.1 Case Layout ......................... 5 2.1.2 Pager Icons .......................... 6 2.1.3 Turning Your Pager On ......................7 2.1.4 Turning Your Pager Off ......................7 Using the Function Menu ......................
7950 Pager Manual About This Handbook This handbook is designed to assist you use the 7950 pager. Following the steps and checklists correctly will ensure that there will be no problems when using the 7950 pager. Conventions NOTE: A note preceded with this symbol indicates secondary information pertaining to the topic under discussion.
7950 Pager THE 7950 PAGER Getting Started 2.1.1 Case Layout The Commtech 7950 pager has four buttons on its case. Function/Escape Button Left Directional Button Right Directional Button Read/Select Button Function/Escape Button - Used to display the Function menu and escape out of menus...
7950 Pager Manual 2.1.2 Pager Icons The Commtech 7950 pager may display the following icons: Choose Alert Set Time and Alarm Private Time Enabled ■ Private Time Disabled Set Display Zoom 1 Set Display Zoom 2 Set Display Zoom 3...
Manual 7950 Pager 2.1.3 Turning Your Pager On Press for 3 seconds. A start-up screen is momentarily displayed and your pager activates the currently selected alert. Note: Press any button to stop the alert. When the pager is on but no activity is taking place, the screen will turn off.
7950 Pager Manual 2.3.2 Reading an Incoming Message (1) The message will be displayed on the screen. Press any button to stop the alert. Note: A flashing in the right corner of the screen indicates the message is continued on an additional screen (s).
Manual 7950 Pager Locking/Unlocking Message Up to 16 messages can be locked to prevent them from being deleted or from being replaced when the pagers memory is full. When a message is locked, the symbol is replaced by the symbol indicating the message is locked.
7950 Pager Manual Example of Set-Message-Alarm Screen The alarm symbol shows the current alarm status. is displayed if the message alarm is enabled, is displayed if the message alarm is disabled. (5) Press until is displayed. (6) Press to move the cursor to the hour digits.
Manual 7950 Pager 2.10 Setting the Time and Date (4) From the Function menu, press to move the cursor to (5) Press to display the Set-time-and-alarm screen. (6) Press to move the cursor to the hour digit. (7) Press adjust the hour.
7950 Pager Manual 2.12 Pager Alarm Your pager has an alarm that can be set for a specific time and date, or a specific time on a daily basis. At the selected alarm time, your pager alerts. If the alarm passes without being acknowledged flashes until any button is pressed.
Manual 7950 Pager 2.13 Private Time You can select a time period during which your pager is completely silent. Your pager still receives messages but is does not alert. The pager alerts only if an alarm expires or a priority message is received.
7950 Pager Manual (4) Press . The message is now in the notebook. 2.14.2 Deleting Messages from Your Notebooks (1) From the Message-status screen, press to move the cursor to the notebook from where you want to delete a message.
Manual 7950 Pager APPENDIX Further Help and Support Contact your Place of Purchase A CommtechWireless Authorized Distributor or Dealer sets up most systems. Contact your place of purchase with inquiries beyond the scope of this manual. This Product is Not Field Serviceable Should a fault develop with the hardware or software, contact your place of purchase for the most appropriate form of action.
7950 Pager Manual Specifications * Note: Specifications subject to change without any notice Equipment type ................ Alphanumeric POCSAG Pager Rx frequency (MHz) ............138-174, 278-284, 448-472, 989-932 Baud rate ................512, 1200, 2400 bps selectable Power supply ..................1 x AA battery 1.5 volts Nominal battery life ..........
Need help?
Do you have a question about the 7950 and is the answer not in the manual?
Questions and answers