Overview; Features - Firecom pantherC Series Operation Manual

OVERVIEW

The Firecom pantherC series is a digital intercom system designed for use in
rugged, physical conditions and challenging acoustic environments. The durable
construction, with recessed controls, is ideal for use on fire apparatus, emergency
vehicles or any other mobile command equipment. The pantherC series provides
high volume, clear digital audio communication. NFPA 1500 standards require
hearing protection for extreme noise environments over 98dB. Firecom headsets
should be added to the intercom system for additional hearing protection.
The digital, two-wire network system is designed to provide clear communication
for all personnel with minimal installation work. Multiple pantherC series units may
be installed in series to service a large network of stations without audio degradation.
The remote unit, typically installed at the ladder tip, includes a live microphone to
continuously transmit to base station units. Base station units include a Push-To-Talk
(PTT) button to transmit to other intercom positions. All units include a headset
jack. With the addition of headsets, all personnel have full two-way communication
capability, radio transmit, and receive (requires the analog interface unit), as well as
excellent hearing protection.
Radio transmit and receive can be added to the pantherC series with an analog
interface unit. The optional interface unit provides full radio communications with
either a Firecom "in-cab" intercom or with direct input from a two-way radio. The
pantherC1 base stations can keep personnel fully informed by monitoring radio
traffic. In addition, all positions on the pantherC series have radio transmit capability
by using a Firecom series 10 headset with red PTT button.
WARNING
Safety Information
Firecom's pantherC series intercom speaker is loud enough to cause hearing damage. Use the
volume control provided on the intercom to reduce the speaker volume to a safe level for the
environment in which the intercom is being used or use Firecom headsets to reduce noise.
2

FEATURES

Base Station
pantherC1
PTT button
Volume
(Push-To-Talk)
Control
Power Switch
Headset Jack
Wire Connection
Speaker
The speaker broadcasts audio when headsets are not used.
Status Light
The status light illuminates when a station is operating properly. An internal diagnostic
check is performed every time a unit is turned on.
Volume Control
The volume knob controls the audio level of the speaker. It will not turn the audio
completely off.
Microphone
The microphone receives audio. It is activated by the PTT button on base stations
and "live" on remote stations. The microphone is deactivated when ever a Firecom
10 series headset with a red PTT is plugged in.
Panel PTT Button
The PTT button activates the microphone on base stations.
Power Switch
The power switch (only on the base units) controls station power. It will not affect other
stations.
Headset Jacks
Use only Firecom 10 series headsets with red PTT buttons in the headset jacks for
hands-free, full-duplex communications. Additional radio or in-cab communications
are available. See "Options and Accessories" section in this manual.
Wire Connection
See "System Wiring" section in this manual.
Remote Station
pantherC2
Speaker/Mic
Status Light
Headset
Volume
Jacks
Control
Wire Connection
3