Universal Battery Charger (Ubc) Adapter; Spare Battery Charging - Symbol MC3000 User Manual

Universal Battery Charger (UBC) Adapter

The UBC Adapter can be used with a power supply as a standalone spare battery charger or it can be used with the four station
UBC2000 to simultaneously charge up to four spare batteries. For additional information on the UBC 2000, refer to the UBC 2000 Quick
Reference Guide p/n 70-33188-xx.
Use only a Symbol approved power supply output rated 15 VDC and minimum 1.5 A. Use of an alternative
power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for
the power supply regulatory compliance statement.

Spare Battery Charging

To charge spare batteries:
1. Insert the spare battery into the spare battery charging slot, bottom first.
2. Pivot the top of the battery down onto the contact pins.
Battery Clip
3. Gently press down on the battery to ensure proper contact. The Standard Battery usually charges in less than four hours and
the Extended Life Battery usually charges in less than six hours. See,
4. When charging is complete, press the battery clip and lift the battery out of the slot.
2
Figure 4-5. UBC Adapter Battery Insertion
Battery
1
UBC Adapter
Spare Battery
Charging Slot
Table 4-2 on page 4-12 for charging status indications.
Accessories 4-11