Installing the casing cover
Note
This cover is not essential for the safe operation of the Wallbox.
28
Attaching the casing cover
1. Attach the casing cover at the top, and ensure
that the hooks of the casing cover are correctly
inserted 1.
2. Press the cover downwards, and then tilt the
casing cover 2 towards the back.
The casing cover must slide into the lower
guides with very little resistance.
ATTENTION
Ensure that the casing cover sits correctly
into the casing guide on all sides. Only a
small uniform gap should be present.
Locking mechanisms
1. Press the lower part of the casing cover onto
the Wallbox until the locking mechanisms 1
engage fully.