Installing The Wallbox - BMW I Wallbox Installation Instructions Manual

Installing the Wallbox

The attachment material supplied is suitable for concrete, tiling, and wood (without the use of plugs). If
the substructure is not one of the above, then a suitable type of attachment must be selected.
Note
If the substructure is not one of the above, then the attachment materials must be provided
by the customer. It is essential that the device is fitted correctly, and this is outside the
responsibility of the device manufacturer.
Installation preparations
20
Drilled holes
Note
Comply with the installation height.
Upper edge of the drilling template =
1500 to 1700 mm.
1. Use the provided drilling template and a spirit
level to mark the locations for the four drilled
holes 1 to 4.
2. Drill the attachment holes.
3. Insert the plugs.
Top attachment screws
1. Screw in the two top wafer-head screws
until the remaining distance from the wall is
≥ 0.79 inches.
1 Wall
2 Plug
3 Drilled hole
4 Wafer-head screw