5 SERVICE AND MAINTENANCE
7614F Grain-Vac Operator's Manual 34-100853-6
5.1 SERVICE
5.1.1 FLUIDS AND LUBRICANTS
1. Grease:
Use an SAE multi-purpose high temperature
grease with extreme pressure (EP)
characteristics.
Also acceptable is an SAE multi-purpose
lithium based grease.
2. Blower Oil:
Use Walinga Blower oil (part# 98-13813-6)
Reservoir Capacity: +1 1/4 quarts
Model 7614F
Front
Rear
3. Storing Lubricants:
Your unit can operate at top efficiency only if
clean lubricants are used. Use clean containers
to handle all lubricants. Store them in an area
protected from dust, moisture and other
contaminants.
5.1.2 GREASING
Refer to Section 5.1.1 for recommended grease. Use
the Service Record checklist provided to keep a
record of all scheduled servicing.
1. Use a hand-held grease gun for all greasing.
2. Wipe the grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
3. Replace and repair broken fittings immediately.
4. If the fittings will not take grease, remove and
clean thoroughly. Also clean the lubricant
passageway. Replace the fitting if necessary.
Table 4
1 litre
2 litre
40