Attaching/Unhooking - Walinga Grain-Vac 7614F Operator's Manual

4.8

ATTACHING/UNHOOKING

The Grain-Vac® should always be parked on
a level, dry area that is free of debris and
foreign objects.
Follow this procedure when attaching:
1. Clear the area of bystanders and remove
foreign objects from the machine and
working area.
2. Make sure there is enough room to back
the tractor/power unit up to the hitch point.
3. Start the tractor/power unit and slowly
back it up to the hitch point.
4. Stop the tractor /power unit, place all
controls in neutral, set park brake and
remove ignition key before dismounting.
5. Adjust the length of the drawbar to give
the appropriate dimension between the
PTO shaft and drawbar pin hole. (Refer to
Tractor Operator's Manual).
6. Use the jack to raise or lower the hitch
pole to align with the drawbar.
7. Install a drawbar pin with provisions for a
mechanical retainer such as a Klik pin.
Install the retainer.
7614F Grain-Vac Operator's Manual 34-100853-6
Fig. 4-4 Drawbar
Fig. 4-5 Pin Retainer.
25