Walinga Grain-Vac 7614F Operator's Manual page 32

13 Couple the lower boom to the mid boom
extension by clamping the latch eye over
hook. Adjust clamp if it is necessary to
prevent air leakage at joint. For added
security insert pin through latch handle.
.
15. Ensure the discharge boom is in a
working position to allow a truck to drive
under the discharge cyclone. (fig. 4-14)
16. Reverse the above procedure when
finished working and placing into the
storage or transport configuration.
7614F Grain-Vac Operator's Manual 34-100853-6
Fig. 4-13 Positioning
Fig. 4-14 Placement
29