Installing The System Fans - Supero SuperWorkstation 5038AD-T User Manual

S W
uper orkstation 5038AD-T User's Manual
6-6

Installing the System Fans

The SC732G chassis includes a front cooling fan and a rear exhaust fan.
Installing the Rear Exhaust Fan
1. Power down the system, disconnect the power cord from the rear of the
power supply and remove the chassis cover as described in Section 6-2.
2. Insert the four rubber pins through mounting holes in the rear of the chassis
and through the mounting holes in the rear fan.
3. Pull the rubber pins through the mounting holes of the fan to secure the fan
to the chassis.
4. Connect the fan cable to the motherboard.
5. Replace the chassis cover, reconnect the power cord and power up the
system.
1
2
Figure 6-11. Installing the Rear Exhaust Fan
6-12