Operation - Klarstein Clearcube Manual

OPERATION

Unpacking your ice maker
1. Remove the exterior and interior packaging. Check that ice basket and ice scoop is
included. If any parts are missing, please contact our customer service.
2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and
clean it
3. Find a location for your ice maker that is protected from direct sunlight and other
sources of heat (i.e.: stove, furnace, radiator). Place the ice maker on a level
surface. Maker sure that there is at least 6 inches of space between the back and
sides of your ice maker and the wall.
4. Allow one hour for the refrigerant fl uid to settle before plugging ice maker in.
5. The appliance must be positioned so that the plug is accessible.
Warning: fi ll with potable water only.
Connecting your ice maker
CAUTION
Risk of injury! Improper use of the earthed mains plug may result in
electric shock. If the power cord is damaged, contact your service
representative.
1. This unit should be properly grounded for your safety. The power cord of this
appliance is equipped with a grounding plug which mates with standard grounding
wall outlets to minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounding wall outlet.
Do not under any circumstances, damage the grounding means of the plug under
any circumstances. Any questions concerning power and/or grounding should be
directed toward a certifi ed electrician.
3. This appliance requires a standard 220-240 Volt, 50 Hz electrical outlet with good
grounding means.
EN
17