Driving Position Memory System; Storing A Position In Memory; Adjusting The Head Restraints; Adjusting The Front Head Restraints - Acura TLX 2020 Owner's Manual

VEHICLE CONTROLS

Driving Position Memory System

You can store two driver's seat and door
mirror positions with the driving position
memory system (except for power lumbar
*1
and thigh support ).
When the driver's door is unlocked, and
you open the driver's door with a remote
transmitter, or keyless access system, door
mirrors adjust to one of the two preset
positions and the seat adjusts to retracted
positions of one of the two preset
positions automatically.

Storing a Position in Memory

n
1. Set the power mode to ON. Adjust
the driver's seat and mirrors to the
desired position.
2. Press the SET button.
You will hear the beep, and the
memory button indicator light will
blink.
3. Press and hold memory button 1 or
2 within 5 seconds of pressing the
SET button.
You will hear two beeps, and the indicator light on the button you
pressed stays on once the seat, the steering wheel, and the outside
mirror positions have been memorized.

Adjusting the Head Restraints

Your vehicle is equipped with head
restraints in all seating positions. Head
restraints are most effective for protection
against whiplash and other rear-impact
crash injuries.
The center of the back of the occupant's
head should rest against the center of the
restraint. The tops of the occupant's ears
should be level with the center height of
the restraint.
50 |
For a head restraint system to work properly:
• Do not hang any items on the head restraints or from the restraint legs.
• Do not place any objects between an occupant and the seat-back.
• Install each restraint in its proper location.
Improperly positioning head restraints reduces their effectiveness and
increases the likelihood of serious injury in a crash.
Make sure head restraints are in place and positioned properly before driving.

Adjusting the Front Head Restraints

n
To raise:
To lower:
n Adjusting the Rear Outer and Center Head Restraints
To raise:
To lower:
*1 - If equipped
Pull it upward.
Push it down while pressing the release button.
Pull it upward.
Push it down while pressing the release button.
VEHICLE CONTROLS
| 51