Purge Valve Installation - Agilent Technologies Turbo-V 1K-G Series User Manual

Pump & controller

Hide thumbs Also See for Turbo-V 1K-G Series:

Purge Valve Installation

A gas purge valve is available to protect the pump bearings against

particulate and corrosive gases that could move into the pump.

To install the gas purge valve it is necessary to unscrew the purge

port cover as shown in the following figure,

and then screw the gas purge valve (with a torque of 2.5 Nm) as

shown in the following figure.

Turbo-V 1K-G User Manual/ 87-901-025-01 (A)

Technical Information