Important Safety Instructions; Appliance Handling Safety; Safety Codes And Standards; Electric Safety - Gaggenau BO 450 612 Installation Instructions Manual

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
9
WARNING
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
If the information in this manual is
not followed exactly, fire or shock
may result causing property damage
or personal injury.
9
WARNING
Do not repair, replace or remove any
part of the appliance unless
specifically recommended in the
manuals. Improper installation,
service or maintenance can cause
injury or property damage. Refer to
this manual for guidance. All other
servicing should be done by an
authorized servicer.

Appliance Handling Safety

Unit is heavy and requires at least two
people or proper equipment to move.
Do not lift appliance by door handle.
Hidden surfaces may have sharp
edges. Use caution when
reaching behind or under
appliance.

Safety Codes and Standards

This appliance complies with the latest
version of one or more of the following
standards:
CAN/CSA C22.2 No. 61 - Household
▯
Cooking Ranges
UL 858 - Household Electric Ranges
▯
CAN/CSA C22.2 No. 150 - Microwave
▯
Ovens
UL 923 - Microwave Cooking
▯
Appliances
CSA C22.2 No. 64 - Household
▯
Cooking and Liquid-Heating
Appliances
UL 1026 - Electric Household Cooking
▯
and Food Serving Appliances
It is the responsibility of the owner and
the installer to determine if additional
requirements and/or standards apply to
specific installations.

Electric Safety

Before you plug in an electrical cord, be
sure all controls are in the OFF position.
If required by the National Electrical
Code (or Canadian Electrical Code), this
appliance must be installed on a separate
branch circuit.
Installer - show the owner the location of
the circuit breaker or fuse. Mark it for
easy reference.
Important - save these instructions for the
local electrical inspector's use.
Before installing, turn power OFF at the
service panel. Lock service panel to
prevent power from being turned ON
accidentally.
Refer to data plate for more information.
See "Data Plate" under "Service" for data
plate location.
Be sure your appliance is properly
installed and grounded by a qualified
technician. Installation, electrical
3