Nut Torque For Connectors; Fig. 9 Ethercat Box With M8 Connectors; Fig. 10 Zb8801 Torque Socket Wrench - Beckhoff EtherCAT EP3752-0000 Manual

3.1.3

Nut torque for connectors

M8 connectors
It is recommended to pull the M8 connectors tight with a nut torque of 0.4 Nm. When using the torque control
screwdriver ZB8800 is also a max. torque of 0.5 Nm permissible.
Fig. 9: EtherCAT Box with M8 connectors
Torque socket wrenches
Fig. 10: ZB8801 torque socket wrench
Ensure the right torque
Use the torque socket wrenches available by Beckhoff to pull the connectors tight (ZB8800,
ZB8801-0000)!
EP3752-0000 Version: 1.1
Mounting and cabling
17