SOMFY Sonesse 30 RTS Installation Instructions Manual
Hide thumbs
Also See for Sonesse 30 RTS:
- Installation manual ,
- Instructions manual (108 pages) ,
- User manual (56 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SOMFY Sonesse 30 RTS
Summary of Contents for SOMFY Sonesse 30 RTS
- Page 1 ® Sonesse 30 RTS...
- Page 3 Guía de instalación página 14 Por la presente, Somfy declara que el aparato cumple las exigencias esenciales y el resto de disposiciones pertinentes de la directiva 1999/5/CE. Podrá encontrar una declaración de conformidad en la página web www.somfy.com/CE. Aplicable para la UE, Suiza y Noruega.
- Page 4 • Any use outside the sphere of application specified by Somfy is not approved. Such use, or any failure to comply with the instructions given herein will invalidate the warranty, and Somfy refuses to accept liability.
- Page 5 1) Mount the motorized tube on the end bracket (c). 2) Mount the motorized tube on the motor bracket (d). Wiring Connect the power cable to the motor. Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009...
- Page 6 Recording the RTS transmitter Press the programming button on the back of the RTS transmitter until the motor jogs. The RTS transmitter address is permanently recorded. Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009...
- Page 7 3) Delete the MY position To delete the MY position, move to this position and press the MY button until the shade jogs. Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009...
- Page 8 Sun disappearing position. Press and hold the MY button until the shade jogs. The sun disappearing position is deleted. Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009...
- Page 9 4) To tilt the slats, press and hold the UP or DOWN button or use the scroll of the remote control until the slats reach the desired position. Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009...
- Page 10 PROG. PROG. Quickly press the RTS sensor (C) PROG button to add or delete: the shade jogs and the RTS sensor is programmed or deleted from the motor. Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009...
- Page 11 (MY or down limit) if no sun disappearing position has been memorised. The Wind function is not compatible with this motor. Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009...
- Page 12 UP button to increase the speed or DOWN button to decrease the speed. 3) To confirm the new speed, press and hold the MY button until the shade jogs. Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009...
- Page 13 3) Press and hold the UP or DOWN button to move the shade to the new desired position. 4) To confirm the new limit press and hold the MY button until the shade jogs. Copyright © 2009 Somfy SAS. All rights reserved - V0 - 09/2009...