Monte Carlo Fan Company 5SBR56 D-L Series Installation Instructions Manual page 3

7
Lift mounting neck to mounting Plate
and align screws.
10
Remove 3 screws on arch hub.
13
Install upper glass and holder to fan
body.
16
Remove keeper from cross pin and then
cross pin from yoke. Replace keeper on
cross pin and save.
8
Secure mounting neck to the mount-
ing plate with screws to become
a complete mounting bracket.
11
Use 3 screws removed to attach arch
brackets to arch hub.
14
Install 4 x 25 watt incandescent can-
delabra bulbs.
17
Slide canopy, ball, arch assembly,
and yoke cover over downrod.
Thread lead wires and safety cable
through downrod as shown.
9
Loosen 2 screws and remove gate.
Save gate for use later.
12
Use 3 thumb screws to attach upper
glass to holder.
15
Loosen lock nuts and screws on yoke
till you can not feel screws on inside
of yoke.
18
Align hole in downrod with hole in
yoke and install cross pin. Install
downrod assembly into yoke. Install
keeper into cross pin.