Download Print this page

Monte Carlo Fan Company 5SIEP Owner's Manual And Installation Manual

Advertisement

Quick Links

Owner's Guide and Installation Manual
5SI Series Fan
UL Model No. :AC-212-002
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
18.55 kgs
40.81 lbs
Total fan weight

Advertisement

loading

Summary of Contents for Monte Carlo Fan Company 5SIEP

  • Page 1 Owner’s Guide and Installation Manual 5SI Series Fan UL Model No. :AC-212-002 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 18.55 kgs 40.81 lbs Total fan weight...
  • Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2011 Monte Carlo Fan Company 1/16/2012...
  • Page 3 Note:If Installing The Secondary Support Safety This will allow hands-free wiring. Cable in the U.S., Do Not Remove Knockouts In The Outlet © 2011 Monte Carlo Fan Company 1/16/2012...
  • Page 4 Remove 1 screw and save.Loosen other 2 tabs, and remove them if they are present. At- loosened from step 17. screws. tach blade assembly to motor using the motor screws and washers provided. Tighten screws securely. © 2011 Monte Carlo Fan Company 1/16/2012...
  • Page 5 Reinstall the switch housing using the three screws previously removed. For Light Kit Installation Only Loosen the decorative cover first, it will make it easier to loosen the finial cap and switch cover for light kit installation. © 2011 Monte Carlo Fan Company 1/16/2012...
  • Page 6: Troubleshooting

    2.Check for loose or disconnected wires in fan switch housing. 3.Check for loose or disconnected wires in light kit. 4.Check for faulty light bulbs. CAUTION: Make sure main power is turned off before entering switch housing. © 2011 Monte Carlo Fan Company 1/16/2012...
  • Page 7 Jan.2012 New format Jun.2013 Update for CUL regulation...

This manual is also suitable for:

5si series