Installation; Connections - Flash F1000510 User Manual

10R 3in1 MOVING HEAD F1000510

Dimming: Linear: 0 - 100%

Prism: 3 facet, rotating

GOBO wheel: Fixed - 9 patterns, rotation - 17 patterns

PAN range: 540°

TILT range: 270°

Number of DMX channels: 16 / 17 / 25

DMX standard: DMX 512

Control interface: Wheel controller

AC IN: powerCON

AC OUT: powerCON

DMX IN: XLR - 3 pin, XLR - 5 pin

DMX OUT: XLR - 3 pin, XLR - 5 pin

Cooling: Active

Height [cm]: 58

Width [cm]: 40

Depth [cm]: 32

Weight [kg]: 18
4

INSTALLATION

After removing the packaging, check if the device was not damaged during transport. Before connecting to
the mains, make sure that the device is securely mounted. The manufacturer is not responsible for damage
caused by unstable mounting.
Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are
consistent with device requirements. All activities, including connecting the device to the mains must be
performed by qualified personnel.
5

CONNECTIONS

The device is equipped with the following interfaces:
1. DMX (in/out): XLR 3-pin, XLR 5-pin socket
2. Power (in/out): powerCON socket
3
www.flash-butrym.pl