Tamper Foot Plate; Check The Oil Level In The Tamper Foot - Bomag BT 60/4 Operating And Maintenance Instructions Manual

5.12 Tamper foot plate

Fig. 44
Retighten the screws (Fig. 44).
l
BT 60/4, BT 65/4
Maintenance every month
5.13 Check the oil level in the
tamper foot
i
Note
Stand the tamper of level ground for a short while,
so that all oil can run into the housing.
Fig. 45
Clean the sight glass (Fig. 45).
l
Check the oil level.
l
The oil must be visible in the inspection glass,
l
if necessary fill in oil accordingly.
For quality of oil refer to the table of fuels and
lubricants.
BOMAG 39