Incorrect Starting; Work/Operation - Bomag BT 60/4 Operating And Maintenance Instructions Manual

Vibratory tamper
Table of Contents

Advertisement

Operation

4.6 Incorrect starting

- engine "drowned" -
When the choke is closed and the starter rope is
operated several times, the engine will draw too
much fuel and starting is impossible.
Remedy
Close the fuel shut-off valve
l
Open the choke
l
Set the throttle lever to full speed position
l
Keep on pulling the the starter rope until the
l
engine starts.
If the engine does not start after 10 to 20 starting
procedures,
pull the spark-plug socket off.
l
screw the spark-plug out.
l
Operate the start several times.
l
Dry the spark-plug with a clean cloth or blow it
l
dry with pressure air. If necessary clean it with
a wire brush.
Screw the spark-plug back in and push the
l
spark-plug socket on.
Repeat the starting procedure.
l
24

4.7 Work/operation

Danger
!
Danger of accident!
Guide the machine only with the handle.
Do not let the machine run unattended.
Use your personal noise protection means (ear
defenders).
Fig. 19
Set the throttle lever (Fig. 19) to "MAX"-posi-
l
tion.
The machine works at max. frequency.
l
Fig. 20
In order to achieve a smooth running of the
l
machine adjust the throttle lever in the range I
(Fig. 20), depending on the condition and the
density of the soil.
BOMAG
BT 60/4, BT 65/4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bt 65/4

Table of Contents