Bomag BT 60/4 Operating And Maintenance Instructions Manual page 24

Fig. 21
The travel speed can be influenced by altering
l
the load on the steering handle (Fig. 21).
No load = slowly forward
Fig. 22
The travel speed can also be influenced by
l
varying the pressing force on the steering bow
(Fig. 22).
Strong force = fast forward
i Note
The lift height of the material to be compacted
should not be higher, than the tamper can man-
age.
If the tamper should get out of rhythm on highly
compacted ground, smooth running can be
achieved by slightly changing the engine speed
and/or the inclination of the tamper.
BT 60/4, BT 65/4
Fig. 23
During short breaks you should always set the
l
throttle lever to "MIN"-position (Fig. 23).
i Note
This avoids premature wear of the centrifugal
clutch and reduces the fuel consumption
BOMAG
Operation
25