General Notes; Tests Before Taking Into Operation - Bomag BT 60/4 Operating And Maintenance Instructions Manual

Operation

4.1 General notes

Please read section 3 Indicators and Control Ele-
ments thoroughly before operating the machine if
you are not yet fully familiar with the indicators and
control elements of the machine.
All indicators and control elements are described
in detail in this chapter.
20
4.2 Tests before taking into op-
eration
i
Note
During the running in time the idle speed may in-
crease because of the enhanced moveability of
the engine. Idle speed between 1700 and 2000
rpm.
The running in time of the vibratory tamper is 10
operating hours.
Check
condition of engine and machine
l
engine oil level
l
fuel tank and fuel lines for leaks
l
fuel level
l
concertina wall for damage and leaks
l
oil filling of tamper cylinder
l
Visual inspection of machine
l
BOMAG BT 60/4, BT 65/4