Install the 9 loose coals as follows. The smooth surfaces of the coals should be at
the bottom and back. Select the two smallest coals and put them aside until all the
other coals are installed. Place four of the medium size coals in the four valleys of
the front coal. Place the left side coal so that the customer will be able to see the
pilot flame. See figures 37 and 38.
Place the three remaining medium size coals behind and approximately midway
between each of the coals in the front row. See figures 39 and 40
Fig. 37
Fig. 38
.
Fig. 39
Fig. 40
21