Table of Contents
Advertisement
Viewing Videos
3
2
INPUT
INFO.
HIDE
LENS
LENS
RGB
CONTROL
MEMORY
SOLO
CONTRAST
BRIGHTNESS
COLOR
DIM.
18
Turn on the power
1
Press the C [ON] button
1
Select the image to project
2
Press the [INPUT] button
Play back the selected device to project the image.
0
To hide the image temporarily
Press the [HIDE] button
Press the [HIDE] button again to resume display of the image.
0
The power cannot be turned off when the image is temporarily hidden.
0
Turn off the power
3
Press the B [STAND BY] button
While the "Are you sure you want to turn off?" message is displayed,
0
press the B [STAND BY] button again.
CAUTION
The power cannot be turned off within approximately 60 seconds after it
0
has been turned on.
After the light goes off, the fan will run for about 100 seconds to cool down
0
the lamp (Cool-down mode). Do not disconnect the power cable while
cooling is in progress.
The power cannot be turned on again while cooling is in progress (100
0
seconds).
Pull out the power plug when the unit is not to be used for a prolonged
0
period of time.
Advertisement
Chapters
Table of Contents
