Viewing Videos - JVC DLA-VS2400ZG Instructions Manual

Viewing Videos

LAMP
STANDBY/ON
3
2
22
MEMO
WARNING
When you are using this unit, be sure to remove the lens sheet.
0
Connect the power cord, and ensure that the "STANDBY/ON" indicator
0
lights up in red.
Turn on the power
1
Projector unit: press the A [STANDBY/ON] button
Remote control (sold separately): press the C [ON] button
The "STANDBY/ON" indicator light switches from red to green (light
0
goes off after the unit starts up).
1
"STANDBY/ON" lights up (red)
In standby state
STANDBY/ON TANDBY ND
.
Choose the image to project
2
Projector unit: press the [INPUT] button (pressing the button each time
switches the mode)
Remote control (sold separately):
[HDMI 1]
[HDMI 2]
[COMP.]
Play back the selected device to project the image.
0
To hide the image temporarily
Press the [HIDE] button on the projector unit or remote control (sold
separately)
The "STANDBY/ON" indicator light starts to blink in green.
0
Press the [HIDE] button again to resume display of the image.
0
The power cannot be turned off when the image is temporarily hidden.
0
"STANDBY/ON" lights up (green)
LAMP WARNING
HDMI 1 HDMI 2
.
Button
During lamp startup
LAMP WARNING
STANDBY/ON TANDBY ND
Dual
Terminal
HDMI1
HDMI2
Dual