Viewing Videos - JVC DLA-RS620 Instructions Manual

Viewing Videos

LAMP
STANDBY/ON
Remote Control
3
2
MODE 1 MODE 2 MODE 3
SETTING MEMORY
This unit
MEMO
WARNING
When you are using J, be sure to remove the lens cover.
0
Connect the power cord, and ensure that the "STANDBY/ON" indicator
0
lights up in red.
Turn on the power
1
Remote control: press the C [ON] button
J
Projector unit: press the A [STANDBY/ON] button
The "STANDBY/ON" indicator light switches from red to green (light
0
goes off after the unit starts up).
(H I) The lens cover opens.
0
1
"STANDBY/ON" lights up (red)
In standby state
STANDBY/ON TANDBY ND
.
Choose the image to project
2
1 3
Remote control: press the [HDMI 1] or [HDMI 2] button
2
Projector unit: press the [INPUT] button to switch the input
Play back the selected device to project the image.
0
To hide the image temporarily
Press the [HIDE] button on the projector unit or remote control
The "STANDBY/ON" indicator light starts to blink in green.
0
Press the [HIDE] button again to resume display of the image.
0
The power cannot be turned off when the image is temporarily hidden.
0
"STANDBY/ON" lights up (green)
LAMP WARNING STANDBY/ON
During lamp startup
TANDBY ND LAMP WARNING
21