Driving Position Memory System - Acura 2011 RDX Owner's Manual

SET BUTTON
MEMORY BUTTONS
3. Press and release the SET button
on the driver's door. You will hear
a beep. Immediately press and
hold one of the memory buttons (1
or 2) until you hear two beeps. The
indicator in the memory button
will come on. The current
positions of the driver's seat and
outside mirrors are now stored.
To cancel the storing procedure after
pressing the SET button, do any of
the following:
Fail to press a memory button
●
within 5 seconds.
Readjust the seat position.
●
Readjust the outside mirror
●
position.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
2011 RDX

Driving Position Memory System

Selecting a Memorized Position
To select a memorized position, do
this:
1. Make sure the vehicle is parked.
2. Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
The system will move the seat and
outside mirrors to the memorized
positions. The indicator in the
selected memory button will flash
during movement. When the
adjustments are complete, you will
hear two beeps, and the indicator will
remain on.
CONTINUED
149