Acura 2011 RDX Owner's Manual page 317

To use HFL, you need to pair your
Bluetooth-compatible cell phone to
the system.
Phone Setup
This command group is available for
paired cell phones.
Phone pairing tips
You cannot pair your phone while
●
the vehicle is moving.
Your phone must be in discovery
●
or search mode to pair. Refer to
your phone's manual.
Up to six phones can be paired.
●
Your phone's battery may drain
●
faster when it is paired to HFL.
If after three minutes your phone
●
is not ready to pair or a phone is
not found, the system will time out
and return to idle.
To pair a cell phone:
1. Press and release the HFL Talk
button. If you are pairing a phone
for the first time, HFL will give you
information about the pairing
process. If it is not the first phone
you are pairing, say ''Phone
setup'' and say ''Pair.''
2. Follow the HFL prompts and put
your phone in discovery or search
mode. HFL will give you a 4-digit
pairing code and begin searching
for your phone.
3. When your phone finds a
Bluetooth device, select HFL from
the options and enter the 4-digit
code from the previous step.
4. Follow the HFL prompts and name
the newly paired phone.
2011 RDX
Bluetooth
HandsFreeLink
®
On U.S. vehicles with navigation
system
Once the pairing process is
completed, AcuraLink may display a
connection confirmation screen. This
screen is used to create a data
connection between your cell phone
and the AcuraLink system. You can
choose to set up the data connection
later, or do it later. If you want to do
it now, exit the HFL menu by
pressing the HFL Back button one or
more times.
®
CONTINUED
313