Acura 2011 RDX Owner's Manual page 154

Driving Position Memory System, Parking Brake
To stop the system's automatic
adjustment, do any of these actions:
Press any button on the control
●
panel: SET, 1, or 2.
Push any of the adjustment
●
switches for the seat.
Shift out of Park.
●
Adjust the outside mirrors.
●
If desired, you can use the
adjustment switches to change the
positions of the seat or outside
mirrors after they are in their
memorized positions. If you change
the memorized position, the indicator
in the memory button will go out. To
keep this driving position for later
use, you must store it in the driving
position memory.
150
Parking Brake
Push
PARKING BRAKE PEDAL
To apply the parking brake, push the
pedal down with your foot. To
release it, push on the pedal again.
The parking brake indicator on the
instrument panel should go out when
the parking brake is fully released
(see page 67).
2011 RDX
Driving the vehicle with the parking
brake applied can damage the rear
brakes and axles. A beeper will sound if
the vehicle is driven with the parking
brake on.
You will also see a ''RELEASE
PARKING BRAKE'' message on the
the multi-information display (see
page 79).