Acura 2011 RDX Owner's Manual page 246

Playing Discs (Models with navigation system)
Manufactured under license under
U.S. Patent #'s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents
issued & pending. DTS and DTS
Digital Surround are registered
trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc.
© 1996-2007 DTS, Inc. All Rights
Reserved.
242
Loading Discs
To load multiple discs in one
operation:
1. Press and hold the LOAD button
on the changer unit until you hear
a beep. You will see ''BUSY'' on
the upper display, and the disc
load indicator turns red and starts
blinking.
2. Insert the disc into the disc slot
when the disc load indicator turns
green and ''LOAD'' appears in the
upper display at the same time.
Insert it only halfway; the drive will
pull it in the rest of the way. You
will see ''BUSY'' on the upper
display, and the disc load indicator
turns red again and blinks as the
CD is loaded.
3. When the disc load indicator turns
green and ''LOAD'' appears on the
upper display again, insert the next
CD in the slot.
2011 RDX
Do not try to insert a disc until
''LOAD'' appears. You could
damage the audio unit.
4. Repeat steps 1 through 3 until all
six positions are loaded. If you are
not loading all six positions, press
the LOAD button again after the
last CD has loaded. ''DISC READ''
appears on the upper display, then
the system begins playing the last
loaded.
If you stop loading discs before all
six positions are filled, the system
will wait for 10 seconds, stop the load
operation, and begin playing the last
disc loaded.
To load a single disc:
1. Press and release the LOAD
button on the changer unit. You
will see ''BUSY'' on the upper
display, and the disc load indicator
turns red and starts blinking.