Automatic Transmission Fluid - Acura 2011 RDX Owner's Manual

Acura 2011 rdx automobile owner's manual
Hide thumbs Also See for 2011 RDX:
Table of Contents

Advertisement

Automatic Transmission Fluid

UPPER MARK
HOT
LOWER MARK
MARK
3. Insert the dipstick all the way into
the transmission securely as
shown in the illustration.
4. Remove the dipstick and check the
fluid level. It should be between
the upper and lower marks.
428
FILL PLUG
5. If the level is below the lower
mark, remove the fill plug, then
add the fluid into the fill hole to
bring it to the level between the
upper and lower marks on the
dipstick.
Pour the fluid slowly and carefully
so you do not spill any. Clean up
any spills immediately; it could
damage components in the engine
compartment.
2011 RDX
Always use Acura ATF-Z1 (automatic
transmission fluid).
Use only Acura ATF-Z1 (automatic
transmission fluid). Do not mix with
other transmission fluids.
Using transmission fluid other than
Acura ATF-Z1 may cause deterioration
in transmission operation and
durability, and could result in damage
to the transmission.
Damage resulting from the use of
transmission fluid other than Acura
ATF-Z1 is not covered by the Acura
new vehicle warranty.
6. Insert the dipstick all the way back
into the transmission securely as
shown in the illustration.
If you are not sure how to add fluid,
contact your dealer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents