Reviewing Previous Results - MICROPOINT qLabs ElectroMeter Plus User Manual

Plus when it is not in use.
20.1
48.1
00005

10. Reviewing Previous Results

Follow these steps to review previous results that are stored in the meter
memory.
qLabs.ElectroMeter.manual.Q-2 Plus.indd 22
1.9
Page = 6
PT INR
APTT 16:26
MENU
Before turning off the meter, press the "
button to return to the test mode.
Remove the test strip from the meter.
To perform another test, please use a fresh
test strip. Please use a different finger for a
new test.
In the Test Mode where the display prompts
the user to insert a test strip. Press "MEM"
button.
Select the type of results you want to view:
Display QC TEST results
Display PATIENT TEST results
If no results exist, the meter will prompt "NO
RECORD!".
22
EN
"
2/12/2014 6:17:33 PM