Performing The Test - MICROPOINT qLabs ElectroMeter Plus User Manual

9.9 Performing the Test

NOTE:
• There is a 2 minutes time limit for the user to apply the blood sample.
• When the time limit is reached, the qLabs
display an error code.
qLabs.ElectroMeter.manual.Q-2 Plus.indd 20
Make sure to apply the blood sample directly
on the sample well of the strip. DO NOT
move the qLabs ElectroMeter Plus while
®
adding the blood to the strip.
After the blood sample is added, the qLabs
ElectroMeter Plus will perform the test
automatically.
If insufficient blood sample is added, the
qLabs ElectroMeter Plus will not begin its
®
testing and will continue to prompt the user
to add blood sample.
After 30 seconds, if insufficient blood is still
detected, the qLabs
ask the user to confirm if the blood sample
addition is completed.
Press "NO", the qLabs
will continue waiting for blood sample. Press
"YES", the qLabs ElectroMeter Plus will stop
®
waiting for blood addition and start testing
immediately.
ElectroMeter Plus will
®
20
ElectroMeter Plus will
®
ElectroMeter Plus
®
EN
®
2/12/2014 6:17:29 PM