Table Of Contents - MICROPOINT qLabs ElectroMeter Plus User Manual

1.
2.
3.
4.
5.
6.
7.
8.
9.
qLabs.ElectroMeter.manual.Q-2 Plus.indd 1

Table of Contents

Introduction.....................................................................................3
1.1 Before You Start
1.2 Intended Use
1.3 Test Principle
1.4 Packaging
Accessory List................................................................................5
Product Overview...........................................................................5
Operation Summary........................................................................7
Before Testing.................................................................................7
Precautions, Limitations and
6.1 Care of Your qLabs
6.2 Patient Health Status
6.3 Performing a Test
6.4 Collecting a Finger Stick Blood Sample
6.5 Electromagnetic Compatibility
Powering the qLabs
7.1 Power Connection
7.2 Powering the qLabs
7.3 Powering the qLabs
qLabs ElectroMeter Plus
®
8.1 Enter Setup Mode
8.2 Setting the Date
8.3 Setting the Time
8.5 Patient ID Setup
8.6 QC Lockout Setup
8.7 Selecting Language
Perform a Test..............................................................................15
9.1 Entering Test mode
9.2 Insert a Test Strip
9.3 Entering the Patient ID
9.3.1 Manual Input
9.3.2 Auto Scan
9.4 Confirming the Patient ID
9.5 Entering the Strip Code
Warnings.........................................8
ElectroMeter Plus
®
ElectroMeter Plus ON and
®
ElectroMeter Plus On
®
ElectroMeter Plus Off
®
Settings.............................................12
1
EN
OFF...............10
2/12/2014 6:16:27 PM