Advertisement
Cam Lock
(4 used in this step)
Cam Bolt
(4 used in this step)
2
L
1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Place the Drawer Front (L) on a level and protective surface with the holes facing up. Securely screw
four Cam Bolts (2) into the designated small holes, as shown in the illustration.
3. Attach the Drawer Side Panels (N and O) to the Drawer Front (L) by engaging four Cam Locks (1)
(Refer to page 3 on Cam Lock system operation supplement). Make sure that the grooves face inward
and line up with each other.
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing
Utility Drawer Assembling
①
②
2
1-866-942-5362
O
Page 6
Stock # BH45-021-199-03
N
1
L
Factory No. 16086
Advertisement
