Setup - Toro Reelmaster 3555 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
Media and Additional Parts
Description
Keys
Operator's Manual
Engine owner's manual
Cutting performance paper
Shim
Note:
Determine the left and right sides of the machine from the normal operating position.
Description
Right hose guide
Left hose guide
No parts required
Warning decal 121-7928 (machine
model 03910)
Warning decal 138-1186 (machine
models 03820 and 03821)
CE decal
Production year decal
Lock bracket
Rivet
Washer
Screw (1/4 x 2 inches)
Locknut (1/4 inch)
No parts required
Cutting-unit kickstand
Qty.
1
1
–
1
1
1
1
1
2
1
1
1
–
1
Qty.
2
Start the engine.
1
Read the manuals before operating the machine.
1
Use the paper for adjusting the cutting unit reel-to-bedknife
1
contact.
Use the shim for adjusting the cutting unit reel-to-bedknife
1
contact.
13
Use
Install the cutting units.
Adjust the turf compensation spring.
Install the CE decals, if required.
Install the hood latch (CE only).
Reduce the tire pressure.
Use the cutting-unit kickstand.
Use