Table of Contents
Advertisement
4 - DIMENSIONS, CLEARANCES
4.3 - 30RQSY 039-045, units with and without hydraulic module, without filter frame
14
*
Legend
All dimensions are given in mm.
Control box
Water inlet.
Water outlet
B
Required clearances for air flow
C
Recommended clearances for maintenance
Air outlet, do not obstruct
Power cable entry
NOTES:
A Non-certified drawings.
Refer to the certified dimensional drawings supplied
with the unit or available on request, when designing
an installation. For the location of fixing points,
weight distribution and coordinates of the centre of
gravity refer to the certified dimensional drawings.
B Provide a gutter around the unit to collect the
condensate water or install the accessory
condensate collection pan (30RQSY 039 to 078).
C The unit must be installed level (less than 2 mm per
metre deviation in both axes).
D Units 30RQSY 039 to 078 are equipped with a sleeve
on the air heat exchanger side to allow connection
of a suction air frame.
*
Overall dimensions
Advertisement
Table of Contents
