30Rqsy 039-045, Units With And Without Hydronic Module, Without Filter Frame - Carrier Aquasnap 30RQS Series Installation, Operation And Maintenance Instructions

4.3 - 30RQSY 039-045, units with and without hydronic module, without filter frame

Legend:
All dimensions are given in mm
Control box
Water inlet
Water outlet
Required clearances for air flow
Recommended clearances for maintenance
Air outlet, do not obstruct
Power cable entry
14
*
NOTES:
A Non-certified drawings.
Refer to the certified dimensional drawings supplied with the unit or available on
request, when designing an installation. For the location of fixing points, weight
distribution and coordinates of the centre of gravity refer to the certified dimensional
drawings.
B Provide a gutter around the unit to collect the condensate water or install the
accessory condensate collection pan (30RQSY 039 to 078).
C The unit must be installed level (less than 2 mm per metre deviation in both axes).
D Units 30RQSY 039 to 078 are equipped with a sleeve on the air heat exchanger
side to allow connection of a suction air frame.
* Overall dimensions