Technical Data - S+S Regeltechnik THERMASGARD RGTM 2 Operating Instructions, Mounting & Installation

G
THERMASGARD ®
The calibratable flue gas ⁄ screw-in temperature measuring transducer THERMASGARD
switchable measuring ranges, with neck tube, exchangeable spring-mounted measuring insert, straight protective
tube, connecting head made of aluminium and continuous output for the detection of high temperatures in gaseous
media, e.g. for exhaust air or flue gas temperature measurement. These sensors are factory-calibrated. Adjust-
ment ⁄ fine adjustment by the user is possible (range and zero point are adjustable).

TECHNICAL DATA

Power supply:
Working resistance:
Load resistance:
Power consumption:
Sensor:
Measuring ranges:
Deviation, temperature:
Output:
Ambient temperature:
Connection type:
Process connection:
Protective tube:
Connecting head:
Electrical connection:
Humidity:
Protection class:
Protection type:
Standards:
THERMASGARD ® RGTM 2 – Screw-in ⁄ smoke gas temperature measuring transducer with neck tube
Type ⁄ WG01
RGTM 2 - I
R G T M 2 - I 10 0 / 8 0 M M
R G T M 2 - I 15 0 / 8 0 M M
R G T M 2 - I 2 0 0 / 8 0 M M
R G T M 2 - I 2 5 0 / 8 0 M M
R G T M 2 - I 3 0 0 / 8 0 M M
R G T M 2 - I 4 0 0 / 8 0 M M
RGTM 2 - U
R G T M 2 - U 10 0 / 8 0 M M
R G T M 2 - U 15 0 / 8 0 M M
R G T M 2 - U 2 0 0 / 8 0 M M
R G T M 2 - U 2 5 0 / 8 0 M M
R G T M 2 - U 3 0 0 / 8 0 M M
R G T M 2 - U 4 0 0 / 8 0 M M
Extra charge:
RGTM 2
24 V AC ⁄ DC (± 10 %) for U variant
15...36 V DC for I variant, depending on working resistance,
residual ripple stabilised ± 0.3 V
max. 750 mA ⁄ 24 V DC for I variant
10 kOhm (load max. 1 mA) for U variant
< 0.2 VA ⁄ 24 V AC ⁄ DC
< 0.55 VA ⁄ 24 V DC
Pt1000, DIN EN 60751, class B,
glass sensing resistor
multi-range switching with 8 switchable measuring ranges,
see table (other ranges optional)
with manual zero point correction (± 5 K)
± 0.2 K at +25 °C
0 - 10 V or 4...20 mA
measuring transducer –30...+70 °C
2- or 3-wire connection
screwed socked with G ½ " straight pipe thread
stainless steel, 1.4571, V4A,
G ½ " straight pipe thread, wrench size 27 mm, p
length of neck tube (HL) = 80 mm
inserted length (EL) = 100 - 400 mm (see table)
form B, material aluminium,
colour white aluminium (similar to RAL 9006),
M 20 x 1.5
0.14 - 1.5 mm²
via terminal screws
< 95 % r. H., non-precipitating air
III (according to EN 60 730)
IP 54 (according to EN 60 529),
IP 65 (optional)
CE conformity,
electromagnetic compatibility according to EN 61 326,
EMC directive 2014 ⁄ 30 ⁄ EU
Sensor Output
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Protection type IP 65 (B-Head)
Other ranges optional
® RGTM 2 with eight
= 40 bar, Ø = 8 mm
max
Inserted Length (EL) Item No.
IP 54, I - variant
100 mm 1101- 2162-0029- 800
150 mm 1101- 2162-0039- 800
200 mm 1101- 2162-0049- 800
250 mm 1101- 2162-0059- 800
300 mm 1101- 2162-0069- 800
400 mm 1101- 2162-0089- 800
IP 54, U - variant
100 mm
1101- 2161-0029- 800
150 mm 1101- 2161-0039- 800
200 mm 1101- 2161-0049- 800
250 mm 1101- 2161-0059- 800
300 mm 1101- 2161-0069- 800
400 mm
1101- 2161-0089- 800
Rev. 2017 - V12 GB