Safety And Warning Labels - Hitachi AMS 2000 Series Service Manual

Safety and warning labels

In this equipment, warning labels at pasted on areas requiring special care.
Warnings written on them are primarily for service personnel. The following
table shows the symbols contained in warning labels.
Symbol
cv
Table 1: Warning Labels
Meaning
Cautions indicate that failure to take a specified action could
Caution
result in damage to the software or hardware.
Warnings indicate that failure to take a specified action could
WARNING
result in loss of data or serious damage to the hardware.
The Danger symbol warns users of possible injury or death if
DANGER
instructions are not followed.
This symbol warns users of electric shock hazard. Failure to
ELECTRIC
take appropriate precautions such as not opening or touching
SHOCK
hazardous areas of the equipment could result in injury or
HAZARD!
death.
The ESD symbol warns users that the equipment is sensitive
to electrostatic discharge (ESD) and could be damaged if
Electrostatic
users do not take appropriate precautions such as using a
Sensitive
grounded wrist strap when touching or handling the
equipment.
HOT SURFACE! Turn off power and allow to cool before
Burn Hazard
touching.
No
Do not disassemble the equipment.
Screwdrivers
Heavy Handle the heavy equipment carefully.
Caught
Be careful that your fingers do not get caught in moving parts.
Fingers
Equipment Do not put anything on top of an array that is partially out of
Safety a rack.
Safety guidelines
Hitachi AMS 2000 Family Storage System Service Guide
Description
xxv