Hitachi AMS 2000 Series Service Manual page 125

Table 4-5: Base Unit Power Supply Safety Components
3. Push the blue lock button on the end of the lock lever inward to unlock
the lever. Then pull the lever outward from the power supply. As you do
this, the lever will pull the power supply out of the unit and unplug the
power supply from the connectors inside the unit. The power supply will
now be about 1/2" (12 mm) out of the unit, as shown below.
Table 4-6: Unlocked Base Unit Power Supply
AMS 2100/2300
4. Using both hands, slide the power supply out of the unit. See
12.
Hitachi AMS 2000 Family Storage System Service Guide
Item
1
2
Item
Replacing parts
Description
Power Cable Retainer
Safety Lock
Description
1
Safety Lock
2
Lock Lever
3
Lock Button
4
Power Cable Retainer
Figure 4-
4–19