Dvr Player Troubleshooting - SVAT Do-It-Yourself Compact DVR Security System CLEARVU2 Instruction Manual

DVR PLAYER TROUBLESHOOTING

No display on television
DVR not recording
No playback
During playback, I can't switch to
different camera views.
CLEARVU2
1. Make sure all RCA and power cables are plugged in securely and in their
proper places.
2. Make sure your television is on the correct channel (input mode).
1. Make sure recording is enabled in each camera's setting. Go to
>Camera Setup>Camera Setting and enable recording for each camera if it
has been disabled.
2. Make sure recording is enabled and set to the correct recording setting in
scheduled recording. Go to
(-) is over any hour of the day, that means recording is disabled for that time
period. Press ►/4 to enable recording for that hour. Also make sure you
press REC when you return to Monitoring Mode, or your scheduled recording
will not take effect.
3. Your disk may be full. By default the DVR should start writing over your
recorded files, but this option may be disabled. Go to Menu>Hard Drive
Setup>Disk Full. Set it to OVERWRITE.
4. Make sure your DVR is in Monitoring Mode, and not at a menu screen or in
Playback Mode.
1. There is a delay while the DVR searches for your recorded files. Wait a few
moments and your files should appear.
2. Make sure you are not in Recording Mode. Pressing PLAY during recording
will have no effect. Press STOP first.
3. If you have just formatted the hard drive or your drive is otherwise empty,
there will be no files to play back.
To switch between cameras during playback, you must have recorded in
EACH mode. Change this setting using
Type.
SVAT ELECTRONICS
>Record Setup>Record Mode. If a line
>Record Setup>Record
now you can see
23