Ex-Data - Ecom Instruments Ex-PMR 1000 Operating Instructions Manual

5.4 Vehicles
5.4.1 Automobiles
Under certain circumstances, RF signals can have a negative impact on the
function of improperly installed or insufficiently shielded electronic systems
within your automobile (e.g. electronically controlled fuel injection, electronic
anti-lock braking systems, electronic speed regulator, air bag systems). You
can obtain information about your vehicle from your vehicle manufacturer
or his representative. To prevent disturbances, only skilled personnel should
install the radio unit in the vehicle. Faulty installation or maintenance can lead
to dangerous consequences. Please keep in mind that these mistakes may
result in the forfeiture of the valid warranty on your unit. We recommend regu-
lar inspection of all installed components of the radio unit equipment in your
vehicle. In vehicles with airbags, these airbags are filled with a great deal of
kinetic energy. To reduce the risk of injuries or malfunctions, you should not
mount any parts in the area claimed by the inflated airbag.
5.4.2 Airplanes
The use of radio units on airplanes is prohibited in most cases. Turn your
radio unit off before boarding the airplane. Since operation of a radio unit
on board an airplane can have dangerous consequences, non-compliance
with such instructions may result in the person acting contrary to instructions
being forbidden to use it and/or legal action could be initiated against him/
her.
5.5 Detonaters and detonating areas
To avoid possible interference with the detonating operation, you should take
your radio unit out of operation in the vicinity of electric detonators, in a deto-
nating area or in environments with an appropriate instruction to "Turn off all
transmitting and receiving devices". Follow all warnings and instructions.

6. Ex-data

EC-type examination certificate no.:
Ex-designation:
Approved for Zones 2 and 1, device group II, gas group C potentially explosi-
ve gases, vapours or mist, temperature class T4.
Approved for zone 22, device group II, dust with increased risk of explosion, T130 °C.
ZELM 05 ATEX 0271
II 2 G Ex ib IIC T4
II 3 D Ex ibD 22 T130°C IP5x
31