Table of Contents
Advertisement
TOT – Rekey Time
After activating the TOT – shut-off timer, the send function is blocked until the
pre-set time (TOT-Rekey Time) has lapsed.
The function is deactivated. Changing the setting is only possible with optional
software.
TOT – Alert Time
An alarm sounds at a programmed point in time before activating the TOT
– shut-off timer. Subsequent send interruption by TOT – shut-off timer. The
function is deactivated. Changing the setting is only possible with optional
software.
Monitor
Radio activities on the current channel can be monitored by pressing and hol-
ding the "MONI" key. This is especially useful for setting the volume or if you
are receiving a weak signal.
When holding the "MONI" key, the green LED display illuminates.
Channel search run
Set the channel switch to "S"; the radio unit then only automatically records
the channels that have been programmed for search run in channels 1-15. If
a signal is detected on a channel, the radio unit stops on this active transmis-
sion channel.
Preferred channel search run
Each programmed channel can be set as a preferred channel. The radio
unit records the preferred channel at regular intervals and interrupts a non-
preferred channel. If a signal is detected on the preferred channel, the radio
unit automatically goes to this channel.
The function is deactivated. Changing the setting is only possible with optional
software.
Revert Channel Search Run
This function brings you to the right channel, while you are initiating a call
during channel search run. Press PTT and the unit will stop search run and
transmit on the revert channel (channel 1).
Busy Channel Lockout
If the selected channel is set as "Busy Channel Lockout" and being used by
35
Advertisement
Table of Contents
