Led Display / Charging Process - Ecom Instruments Ex-PMR 1000 Operating Instructions Manual

9.2 LED display / Charging process

An LED display is located on the front side of the charger to indicate the
charge status.
ERROR
CHARGING
FULLY CHARGED
If the charger is connected to the power supply unit, The LED will not illumi-
nate. When an Ex-PMR 1000 with mounted or individual Ex-AM PMR 1000 is
inserted, the LED illuminates in red (CHARGING).
Charging is complete after about 4 hours and the LED illuminates green
(FULLY CHARGED).
In case of failure, the LED flashes red (ERROR) and the Ex-PMR 1000, or the
battery module, must be removed from the charger immediately. The battery
module and charger should be sent off to ecom instruments GmbH for inspection.
44