Table of Contents
Advertisement
Monitor key
Press the MONI key to monitor activities on the current channel.
Loudspeaker/microphone sockets
When these accessory sockets are not being used, cover them up with the
protective cap.
Belt clip
/
8.2 Functions
All 8 channels are very easy to switch
The Ex-PMR 1000 can be operated on all 8 channels.
FM for crystal-clear connections
Transmission is in frequency modulation (FM), which ensures lifelike and low-
disturbance playback, as with the UKW.
16 channel storage spaces
So you always have sufficient fixed alternatives for your radio partners.
CTCSS & DCS
With CTCSS/DCS, you can ignore unwanted calls from other parties on the
same channel. When CTCSS/DCS is set, the user can only receive the calls
on the same channel with the same CTCSS/DCS.
Please observe: Although you can ignore unwanted calls with CTCSS/DCS,
this does not mean that your conversations are private.
TOT Switch-off Timer
The Time-out function is used so as not to use the same channel too long and
to prevent damage to the device due to continuous transmission.
If the transmission exceeds the prescribed time (60 s), it is interrupted and an
alarm sounds. This is stopped by releasing PTT. Press PTT again to transmit.
TOT-Reset Time
If the send pause is longer than the set time (TOT-Reset Time), the TOT –
shut-off timer will be reset. If the send pause is shorter than the set time (TOT-
Reset Time), the TOT – shut-off timer will be added on.
The function is deactivated. Changing the setting is only possible with optional
software.
34
Ex-battery module
/
Battery locking mechanism
Advertisement
Table of Contents
