Connecting The Ic Recorder To A Computer - Sony ICD-UX570 Help Manual

Help Guide
IC Recorder
ICD-UX570 / ICD-UX570F

Connecting the IC recorder to a computer

To exchange files between your IC recorder and a computer, connect the IC recorder to the computer.
Slide the USB slide lever on the side of the IC recorder downward to push out the USB connector, and
1
insert it into the USB port on a running computer.
Make sure the IC recorder is successfully detected by the computer.
2
On the Windows computer, open [Computer] or [PC], and make sure that [IC RECORDER] or [MEMORY CARD] is
detected.
On the Mac, make sure that [IC RECORDER] or [MEMORY CARD] drive appears on the Finder.
The IC recorder is detected by the computer as soon as a connection is made. While the IC recorder is connected
to the computer, [Connecting] appears on the display window of the IC recorder.
Related Topic
Disconnecting the IC recorder from the computer
5-006-946-11(1) Copyright 2019 Sony Corporation
154